- Over 200 000 orders annually
- Over 25 million magnets in stock
Made of plates, wooden rods and magnets
Online since: 16/12/2015, Number of visits: 96428
The wooden rodsFirst, you need wooden rods. Their diameter depends on the plates or trays you choose and the resulting needed magnetic strength. For ferromagnetic Hay trays smaller magnets and 20 mm rods are sufficient. Non-ferromagnetic plates require strong magnets and thicker rods (ě 24 - 25 mm). You can also use a broomstick.
The magnetsAnd since you can't do it without them, you'll need magnets! For this project I recommend 3 strong disc magnets with a small diameter. Since the plates used are not ferromagnetic, you'll also need a very flat disc magnet that is placed under the plate and functions as a magnetic counterpart for the rod below.
The rest is child's play - just glue in the magnets. Mark the magnetic poles ahead of time, so the rods actually attract each other and the etagere is stable. For optimum adherence the magnets should be embedded flush in the rods, so they don't stick out or are sunk too deeply in the wood. The use of UHU MAX REPAIR is recommended.
The etagere practically assembles itself. First, place the flat magnet centered under the bottom plate. If it makes the plate uneven, glue a felt pad underneath to balance it out. Then place the rod that's magnetised on both sides on the plate. It follows the second plate and the rod that's magnetised on one side. The mag(net)ic etagere is ready for use!
Note from the supermagnete team: We would not recommend lifting up the etagere when it has items on it. The plates could break despite the strong magnets. Just use the magnetic etagere as a very special decoration object.
On the adjacent photo you can see an application with magnetic trays. Here, the magnets only need to be embedded in the rods; no counter-magnet is necessary.
Can you feel the magnetic force? Check out this and other projects on my blog Bildsch÷nes (ravishingly beautiful).
The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.