S-13-01-STIC

Disc magnet (self-adhesive) Ø 13 mm, height 1 mm

Neodymium, N35, nickel-plated
promptly deliverable

Description

The convenient solution if you want to glue on a disc magnet. This is a very flat disc magnet (13 mm diameter, 1 mm thin) with a self-adhesive side. Simply remove the film and it glue on.
With this magnet you can turn any surface into a bulletin board in no time and you can hang up photos without drilling holes.
When you order 20, you receive 10 magnet pairs!
Read about more features and tips

Technical data

Article ID S-13-01-STIC
EAN 7640155437820
Material NdFeB
Shape Disc (self-adhesive)
Diameter 13 mm
Height 1 mm
Tolerance +/- 0,1 mm
Direction of magnetisation axial (parallel to height)
Coating Nickel-plated (Ni-Cu-Ni)
Magnetisation N35
Strength approx. 710 g (approx. 6,96 N)
Max. working temperature 80°C (possibly lower)
Adhesive 3M, No. 467MP
Shelf life adhesive 12 months (approx.)
Weight 1 g
Adhesive data sheet
PDF data sheet

Additional features and tips


Click to enlarge
Every magnet is self-adhesive on one side. Thanks to a small flap the film can be peeled off easily.

Click to enlarge
The magnets will be delivered in pairs, meaning one half with a self-adhesive south pole and one half with a self-adhesive north pole.
A sales unit contains a strip with 10 magnet pairs, which equals 20 individual magnets. If you order 20 pieces in the shop, you'll receive a strip as shown in the picture.
Self-adhesive magnets need to be placed, pressed and dried on suitable surfaces to adhere properly. Please read our FAQ about self-adhesive magnets.
The used adhesive is a 3M adhesive (type 467MP). The English data sheet for the adhesive can be found here: 3M data sheet (PDF)
The same principle applies of course to the closing of a cardboard box, an invitation card, etc.
A selection of our self-adhesive magnets: From 1 mm thin to 3 kg adhesive force - with or without foam, round or angular - the appropriate self-adhesive magnet for your every need.
This magnet is also suitable for creating name tags. Just glue a magnet on the backside...
... and your name tag is ready. You can find tips and tricks in our FAQ about name tags.