Pot magnets with rubber coat

The rubber coat of these pot magnets protects the sensitive surface from scratches and increases the load capacity in shear direction. We also carry pot magnets with internal thread without rubber coating.

Filter

Filter for size and adhesive force

Reset filter

- mm

- kg

Pot magnets with rubber coat

7 items found

ITNG-16
rubberised pot magnet, with internal thread M4, Ø 20 mm, strength approx. 3,2 kg

5 pcs.	2,21 EUR ea. *
from 15 pcs.	1,92 EUR ea. *
from 40 pcs.	1,70 EUR ea. *
from 80 pcs.	1,57 EUR ea. *

Ask for a rebate from 260 pcs.

5 pcs. 2,21 EUR ea.

Available: 79 355 pcs.

CMN-22
rubberised pot magnet, for cable mounting, Ø 22 mm, strength approx. 3,9 kg

1 pc.	4,49 EUR ea. *
from 3 pcs.	4,20 EUR ea. *
from 10 pcs.	3,93 EUR ea. *
from 20 pcs.	3,81 EUR ea. *
from 40 pcs.	3,69 EUR ea. *

1 pc. 4,49 EUR ea.

Available: 77 pcs.

ITNG-25
rubberised pot magnet, with internal thread M5, Ø 29 mm, strength approx. 11 kg

1 pc.	5,60 EUR ea. *
from 3 pcs.	4,89 EUR ea. *
from 10 pcs.	4,27 EUR ea. *
from 20 pcs.	3,96 EUR ea. *
from 40 pcs.	3,69 EUR ea. *

Ask for a rebate from 160 pcs.

1 pc. 5,60 EUR ea.

Available: 8 087 pcs.

CMN-31
rubberised pot magnet, for cable mounting, Ø 31 mm, strength approx. 9,1 kg

1 pc.	5,63 EUR ea. *
from 3 pcs.	5,23 EUR ea. *
from 10 pcs.	4,87 EUR ea. *
from 20 pcs.	4,70 EUR ea. *
from 40 pcs.	4,55 EUR ea. *

1 pc. 5,63 EUR ea.

Available: 693 pcs.

ITNG-32
rubberised pot magnet, with internal thread M6, Ø 36 mm, strength approx. 21 kg

1 pc.	7,02 EUR ea. *
from 3 pcs.	6,16 EUR ea. *
from 10 pcs.	5,39 EUR ea. *
from 20 pcs.	5,02 EUR ea. *
from 40 pcs.	4,69 EUR ea. *

Ask for a rebate from 140 pcs.

1 pc. 7,02 EUR ea.

Available: 4 280 pcs.

CMN-43
rubberised pot magnet, for cable mounting, Ø 43 mm, strength approx. 10 kg

1 pc.	5,71 EUR ea. *
from 3 pcs.	5,31 EUR ea. *
from 10 pcs.	4,95 EUR ea. *
from 20 pcs.	4,77 EUR ea. *
from 40 pcs.	4,62 EUR ea. *

1 pc. 5,71 EUR ea.

Available: 492 pcs.

ITNG-40
rubberised pot magnet, with internal thread M6, Ø 45 mm, strength approx. 31 kg

1 pc.	11,13 EUR ea. *
from 3 pcs.	9,84 EUR ea. *
from 10 pcs.	8,69 EUR ea. *
from 20 pcs.	8,12 EUR ea. *
from 40 pcs.	7,63 EUR ea. *

Ask for a rebate from 120 pcs.

1 pc. 11,13 EUR ea.

Available: 2 146 pcs.

Features of pot magnets with rubber coating

Principle: The strong neodymium magnets are embedded in a steel pot. The steel pot increases the adhesive force of the magnet on direct contact with a thick iron surface. If there is no direct contact with the counterpart, or if the steel plate is thin, painted or rough, you can strain it much less.

Shear force: The indicated adhesive force was measured perpendicular to the surface to which the magnet should stick. In order to move the magnet sideways, it doesn't take as much force, despite the rubber coating. Therefore, you can strain a pot magnet much less if you use it on a wall as opposed to using it on the ceiling.

Rust: The rubber protects the magnet from occasional wetness or splash water. Permanent outdoor use, however, may lead to rust build-up. Guaranteed rust-free, on the other hand, are our ferrite pot magnets as well as our waterproof magnets. All further information regarding these products can be found in our FAQ about pot magnets.

Language

Pot magnets with rubber coat

Features of pot magnets with rubber coating