Countersunk pot magnets screw-on

Special features of neodymium mounting magnets

Due to the embedding in a steel pot, the flux lines are directed downwards to the holding surface, which makes the magnetic force especially strong at direct contact with a counterpart. With a countersunk pot magnet the countersunk head screw fits flush into the depression. After screwing it into the ceiling or wall you can attach ferromagnetic objects, such as metal plates or lamps, to the magnet and easily remove them if necessary. This has the advantage that you will not see any drilling holes on the outside. Our applications with pot magnets show versatile application possibilities.

Maximum adhesive force: This requires the direct contact with a counterpart (e.g. steel plate). Even a small gap due to thin, painted or rough surfaces reduces it. The indicated adhesive force is a value calculated under perfect conditions. It is measured at a right angle to the holding surface, which might make a stronger magnet necessary if you use it on a wall as opposed to a ceiling.
The magnet has to hold a certain weight for your project? Contact us if you need help with this.

Rust: Our countersunk magnets have a nickel coating that somewhat protects them against corrosion. We recommend using them in dry indoor areas or purchasing ferrite pot magnets.

The following Produkts may interest you as well:

Screw-on magnets

Pot magnets with cylindrical borehole

Screw-on counterparts for magnets